Home
About Us
Mixers
Tanks
Pumps
Level Controls
Vibrators
Size Reduction
Filters & Presses
Water Analysis
Chemical/Filter Feeders
Fire & Gas Safety Systems
Contact Us
Companies
Literature & Downloads

 

 

 

 

                                                         

 

 

Continuous Level Sensors

 

 

 

SiloPatrol, Cable-Based Smart Sensor

  • Weight and cable-based "Smart" level sensor is unaffected by material composition
  • Innovative hall-effect sensor array helps to eliminate the plumb bob from getting stuck in material
  • Electronic lock-out to inhibit sensor from initiating a measurement cycle during filling operations
  • Split-compartment enclosure isolates all electrical and electronic components from the process environment
  • Virtually maintenance free
  • Measuring range up to 150 feet
 

Flexar, Guided Wave Radar

  • Real-time continuous output provides immediate level measurements
  • TDR (Time Domain Reflectometry) technology is unaffected by dust, bulk density and temperature
  • Focused / directed energy field prevents undesired detection of obstructions within the vessel
  • No moving parts to wear which leads to long operational life
  • Dual-compartment enclosure allows separation of access between the wiring and the setup/ display areas
  • Measuring range up to 100 feet for powder and bulk solids.  Up to 200 feet for many liquids applications

 

Point Level Sensors

 

 

 KA / KAX, Rotary Paddle

  • Rotary paddle bin monitor for detection of dry bulk materials
  • Motor shuts off when paddle is impeded to prevent motor burnout and it extends the life of the unit
  • 2 conduit connections provide easy wiring access
  • Twist on/off cover means no bolts to hold or lose
  • 3 bearing design with sealed bearings fully minimizes drive shaft loads and drag providing extended life
  • Built-in slip clutch protects motor and drive gears from excessive rotational forces
  • Available in hazardous location and high temp, rated up to 750o F
 

 SafePoint, Fail-Safe Rotary Paddle

  • Self-validating rotary paddle bin monitor for detection of dry bulk materials
  • "Fail-safe" eliminates the costs associated with unexpected sensor failures
  • Use of magnetic sensing technology ensures reliable operation even in dusty environments
  • Monitors sensor health, not just power failure
  • Motor shuts off when paddle is impeded to prevent motor burnout and it extends the life of the unit
  • Local status indicating light on ordinary location models
  • Available in hazardous location and high temp, rated up to 750o F
 

 MK-2 / MK-2e, RF Capacitance Probe

  • RF capacitance probe designed to provide a high level of sensitivity, stability and durability
  • Used for powder and bulk solid applications, as well as liquid and slurry applications
  • Split-architecture to remote mount electronics available
  • Internal bin temp up to 450o F and unit is unaffected by high vibration when spit architecture is used
  • immunity to product build-up on probe
  • hazardous location available
  • MK-2 has quick push-button calibration and universal power supply
 

 G / GX / GX-SS, Diaphragm Switch

  • Diaphragm bin monitor for point level detection of dry bulk materials
  • Simple design provides for maximum ease of use and requires no auxiliary power source
  • Sensitivity adjustment that is accessible from outside of the bin and easily adjusted
  • Low profile mounting eliminates major protrusions into the bin
  • The unit incorporates a sensing plate which provides for overpressure protection
  • All parts of the unit are accessible from outside the bin without removing the mounting flange
 

 PZP, Vibratory Probe

  • Vibratory level sensor provides reliable point level detection with powder and bulk solids
  • Unique design makes this unit immune to changes in many different materials and environments
  • Easy set-up only involves selecting the sensitivity and fail-safe settings, no calibration
  • Unique diamond shaped probe designed to minimize material build-up
  • Reinforced stainless steel probe allows for wide range of materials
  • Fail-safe with universal power
 

 VibraRod, Vibratory Probe

  • Vibrating rod sensor provides reliable point level detection with powder and bulk solids
  • A single probe design eliminates problems associated with build-up between "tuning fork" devices
  • Unique design makes this unit immune to changes in many different materials and environments
  • No calibration required
  • local indication on housing with universal power and fail-safe mode
  • Available in hazardous location as well as various probe configurations
 

TC-1 / TC-3, Tilt Switch

  • Tilt switches are point level monitors for detection of dry bulk materials
  • Used as high level indicators to eliminate bin overflow or to control open piles
  • Units can be used in a variety of applications and materials that are >45 lb/ft3
  • Easy installation and adjustable height
  • Available in cast iron or cast aluminum construction and ball-float or paddle-type actuators available
 

 PAC-30U / PDC-30, Proximity Switch

  • Proximity switches are point level devices used to detect the absence or presence of bulk solids
  • Easy installation and calibration
  • Unit available in AC or DC voltage
  • 30mm industry standard housing

 

Solids Flow & Particle Emission

 

 

 SFD-2 & SFI, Solids Flow Monitor

  • Microwave solids flow monitors are capable of providing a flow/ no flow signal for solids and powders
  • Senses light and heavy materials including small and large particles
  • Non-contact sensor detects flow through most non-metallic surfaces
  • No probe protruding into material flow
  • SFD-2 has split architecture consisting of the transceiver and a separate power supply. conditioning circuit board
  • SFI consist solely of a transceiver, which receives its power through the user supplied signal cable and power supply

 

 

 

 DustAlarm, Broken Bag Detector

  • Broken bag detector provides reliable detection of leaks and filter failures in many powder and bulk solids industries
  • Adjustable sensitivity, alarm level and time delay for wide range of applications
  • NEMA 4 housing to be used in general purpose environments with screw on cover
  • 316 stainless steel probe with a PFA extended insulator to help protect the unit from product build up
  • The unit comes with a quick disconnect mounting coupling to simplify the removal if necessary to clean

 

Bin Aeration

 

 

 Rectangular Air Pad, Bin Aerator

  • Aerator device used to promote the flow of dry bulk powders from a storage vessel
  • Effective radius of 10 inches
  • Adapts to almost any bin configuration with easy installation
  • Units are low cost with minimal maintenance
 

 Evasser / Flo-Pad, Bin Aerator

  • Bin aerator used to promote the flow of dry bulk powders from a storage vessel without the noise and damaging vibration caused by pneumatic or electric vibrators
  • Typical effective radius of 12 inches
  • Compact and low cost with almost no maintenance
  • available in cast iron or 316 stainless steel, neoprene boot or FDA boot also an option
  • Flow pad available in 18 inches or 60 inches

 

 




|Home| |About Us| |Mixers| |Tanks| |Pumps| |Level Controls| |Vibrators| |Size Reduction| |Filters & Presses| |Water Analysis| |Chemical/Filter Feeders| |Fire & Gas Safety Systems| |Contact Us| |Companies| |Literature & Downloads|


 
 
 
Louis Vuitton Outlet Louis Vuitton Outlet Louis Vuitton Outlet Louis Vuitton Outlet Louis Vuitton Outlet Louis Vuitton Outlet Louis Vuitton Outlet christian louboutin outlet Louis Vuitton Outlet christian louboutin outlet christian louboutin outlet christian louboutin outlet Louis Vuitton Outlet Michael Kors Outlet Michael Kors Outlet Gucci Outlet Cheap Beats By Dre Cheap Canada Goose Canada Goose Outlet Canada Goose Jackets